Spun /
Melt-Blown
AEW Valves offers Spun / Melt blown Filter Cartridges for dependable depth filtration across a wide range of industrial applications. Their graded polypropylene media helps capture suspended particles efficiently while maintaining good flow and low pressure drop. Available in different micron ratings, lengths and end-cap configurations to suit individual filtration requirements.
- Filter media
- 100% Polypropylene
- Micron rating
- 1–100 µm
- Length
- 10–70″ · customized
- OD / ID (std)
- 61 / 28 mm
- Max temperature
- 82°C · 180°F
- End caps
- 226 · 222 · Fin · Flat
Technical Specifications
| Parameter | Detail |
|---|---|
| Filter Media | 100% Polypropylene |
| Micron Rating | 1, 3, 5, 10, 20, 25, 30, 50, 75 & 100 µm |
| Length | 10″, 20″, 30″, 40″, 50″, 60″, 70″ & Customized |
| Standard OD / ID | 61 ± 0.5 / 28 ± 0.5 mm |
| Jumbo OD / ID | 110 ± 0.5 / 28 ± 0.5 mm |
| Maximum Temperature | 180°F (82°C) |
| Initial Pressure Drop | 0.2–0.6 psi at 19–76 LPM, depending on length and micron rating |
| O-Ring / Gasket | Silicone, FKM, Buna-N, EPDM |
| End Cap Options | Polypro-226, Polypro Core/Extender, Flat/Closed, Poly-222, Fin |
Why this cartridge.
- Multi-layer depth filtration
- High filtration efficiency
- High flow rates
- Low pressure drop
- Centre core for strength
- Consistent filtration performance
- Customizable configurations
Wound
AEW Valves offers Wound Filter Cartridges for applications where reliable depth filtration and high dirt-holding capacity are required. The precision-wound filter media provides effective particle retention through the depth of the cartridge while maintaining steady flow performance. Different micron ratings, lengths and end-cap options are available to meet varying process requirements.
- Filter media
- 100% Polypropylene
- Micron rating
- 1–100 µm
- Length
- 10–70″ · customized
- OD / ID (std)
- 63 / 28 mm
- Max temperature
- 82°C · 180°F
- End caps
- 226 · 222 · Fin · Flat
Technical Specifications
| Parameter | Detail |
|---|---|
| Filter Media | 100% Polypropylene |
| Micron Rating | 1, 3, 5, 10, 20, 25, 30, 50, 75 & 100 µm |
| Length | 10″, 20″, 30″, 40″, 50″, 60″, 70″ & Customized |
| Standard OD / ID | 63 ± 0.5 / 28 ± 0.5 mm |
| Jumbo OD / ID | 110 ± 0.5 / 28 ± 0.5 mm |
| Maximum Temperature | 180°F (82°C) |
| O-Ring / Gasket | Silicone, FKM, Buna-N, EPDM |
| End Cap Options | Polypro-226, Polypro Core/Extender, Flat/Closed, Poly-222, Fin |
Why this cartridge.
- True depth filtration
- High dirt-holding capacity
- Effective particle retention
- Good flow rates with low pressure drop
- Wide range of configurations
- Long service life
- Customizable to process requirements